The Viking G-5 Solar Swing Gate Operator (model VA-G5NXSLR) is a solar-powered, ultra-reliable swing arm actuator engineered for residential and light commercial entry systems. With a powerful 24?VDC motor powered by just one 12?V solar panel and battery, it delivers continuous 24/7 operation, handles gates up to 1,000?lb and 16?ft, and stands up to extreme temperatures from –20?°F to 160?°F. Featuring UL 325 Class I certification, built-in surge protection, LCD diagnostics, and advanced control features, it’s the eco-conscious installer’s top choice for performance and safety.
Installation Instructions
Correct gate and site suitability: Ensure the operator matches gate construction and usage class. Do not use for pedestrian or lifting gates.
Maintain clearance: Gate must have sufficient space from adjacent structures to avoid entrapment. Swing gates should not open into public areas.
Free-flowing mechanical gate movement: Gate must operate smoothly before installing the operator. Avoid overtightening the clutch or using it to compensate misalignment.
Operator control placement: Controls must be in the user’s line of sight, placed at least 6 feet away from any moving parts. Control should prevent reach over, under, around, or through the gate.
Manuals+
Concrete pad & wiring clearance (specific Manhattan recommendation for G-5/solar models): Install operator on a concrete pad (at least 24? x 22? footprint, 30? depth, 6? above grade) and keep low-voltage and high-voltage conduits separated by at least 12?.
Recommendations
Ensure proper solar panel and battery capacity to reach 400 cycles per charge. For poor sun conditions, supplement solar with additional panels/battery.
manualzilla.com
Always install secondary entrapment protections (e.g., edge sensors or photo-beams) to meet UL 325 safety standa
Place control stations visible to gate, at least 6?ft away from moving parts and out of reach of children.
Safety
Read and follow all instructions: Non-compliance may result in serious injury or death.
Keep children away: Do not allow children to operate or play with gate controls. °Keep remotes out of reach.
Avoid contact with moving gate: No one should cross or stand in the path of the gate.
Provide secondary entrapment protection: Required devices include edge sensors and photo-beam (non-contact) sensors, especially in high-risk areas.
Warning signage is mandatory: At least two warning placards, one on each side of the gate, must be visibly installed
